Menu
Your Cart

GOOTWICK CP-2015 DESOLDERING WICK - ORIGINAL

GOOTWICK CP-2015 DESOLDERING WICK - ORIGINAL
GOOTWICK CP-2015 DESOLDERING WICK - ORIGINAL
  • Stock: In Stock
  • Model: CP-2015
  • Weight: 0.01kg
People Interested: 6716
Rs.150
Ex Tax: Rs.150

  • Goot Wick CP-2015 Desoldering Remover Original


    Feature:

    1. Quickly removes unwanted solder when used with a soldering iron.
    2. Only touch the grip and the pack of desoldering wick when desoldering. Failure to do so will result in serious burns.
    3. To avoid fire, never use a soldering iron and desoldering wick around combustibles or in an explosive environment.
    4. Do not force the tip against the desoldering wick to avoid injury to yourself and/or damage to the parts and PCB.
    5. Do not heat the desoldering wick for more than 5 seconds to avoid damage to the parts and PCB. Different Size for choose.

    Use

    • Place the desoldering wick over the solder to be removed, then push the heated soldering iron tip onto the desoldering wick.
    • The solder will be absorbed. Remove the desoldering wick after the solder has been absorbed.
    • Cut off the used section of the wick using nippers.
    • Our thin and soft desoldering wire flat braid has efficient thermal transmission.
    • Removes solder faster with better heat response than previous wicks.
    • Recommended for lead-free solder with high heating load.
    • RMA base flux. High-quality desoldering wick with braided copper wire, saturated with non-chlorine special flux.
    • Can be used for precision PCBs safely. 

Write a review

Please login or register to review