
The FORWARD FW-WX1035 138℃ Ultra-Low Temp Solder Paste – Guard Series is a specialized, fine-particle micro-soldering alloy paste formulated specifically for delicate smartphone motherboard repair, multi-layer sandwich logic board bonding, and heat-sensitive component rework. Engineered under Forward's Guard Series benchmark, this paste features an exact eutectic melting point of 138°C (Sn42Bi58 tin-bismuth alloy formulation), allowing technicians to perform complex BGA reballing and PCB repairs at drastically reduced heating profiles.
By operating at this ultra-low thermal threshold, the FW-WX1035 eliminates the risk of thermal shock, PCB blistering, pad delamination, and unwanted reflow of adjacent pre-soldered components. Its fine micro-spherical powder matrix ensures smooth stencil blade squeegeeing, consistent aperture filling, and crisp release without clogging or bridge defects. Formulated with a halogen-free, non-corrosive, no-clean flux vehicle, it leaves behind an inert, high-insulation residue that will not cause parasitic electrical leakage on high-density smartphone logic boards.
Key Capabilities & Workshop Advantages
- Accurate 138°C Eutectic Melting Point: Melts cleanly and uniformly at 138°C, providing the standard safe thermal boundary required for double-decker logic board separation and re-bonding.
- Component & Board Protection: Prevents thermal degradation of sensitive adjacent chips (NAND, Baseband, CPU, and underfilled power ICs) during hot-air or heating table reflow operations.
- Micro-Fine Powder Matrix (Type 4/5): Ensures uniform particle suspension and smooth squeegee spreading across direct-heat and multi-layer stencils, eliminating solder bridges on micro-pitch pads.
- Guard Series Thermal Stability: High-activity flux carrier reduces violent bubbling, spitting, and microscopic solder balling during heating, ensuring clean, mirror-bright solder joints.
- High Surface Insulation Resistance (SIR): Completely non-conductive, halogen-free formula prevents post-repair phantom shorts, parasitic battery draw, and board corrosion.
- No-Clean Inert Residue: Forms an environmentally stable residue that does not require mandatory chemical washing, keeping repair workflows fast and clean.
- Airtight Storage Container: Packaged in a sealed protective container designed to prevent flux vehicle separation, alloy oxidation, and paste drying on the workbench.
Technical Specification Matrix
Parameter Profile | Specification Details |
Brand & Series | FORWARD – Guard Series |
Product Model | FW-WX1035 |
Alloy Composition | Sn42 / Bi58 (Tin-Bismuth Eutectic Alloy) |
Melting Point | 138°C (280.4°F) |
Powder Particle Size | Type 4 / Type 5 Micro-spherical Powder |
Flux Chemistry | Halogen-Free, No-Clean, High Surface Insulation Resistance (SIR) |
Packaging Format | Sealed Workshop Container / Jar |
Residue Characteristics | Transparent, non-conductive, non-corrosive |
Primary Compatibility | iPhone & Android double-decker sandwich logic boards, delicate FPC connectors, sensor modules |
Recommended Bench Workflows
- Double-Decker Sandwich Board Layering: The standard paste for re-attaching middle frames on iPhone (X through 16 Series) and high-end Android dual-layer boards on heating platforms without disturbing inner-layer 183°C factory BGA chips.
- Plastic-Framed Connector Rework: Soldering battery connectors, display FPC sockets, and camera interfaces without melting delicate plastic housings or nearby structural gaskets.
- Face ID & Sensor Array Repair: Soldering dot projector modules, infrared cameras, and ambient light sensors that degrade or lose calibration under standard 183°C or 217°C heat.
- Heat-Sensitive Flex Cable Soldering: Repairing torn traces on multi-layer flexible flat cables where substrate plastic cannot tolerate standard leaded or lead-free reflow heat.
Package Contents:
- 1 × Forward FW-WX1035 138℃ Low Temp Solder Paste – Guard Series








