
The FORWARD FW-WX1036 Low Temp Solder Paste – Guard Series is a professional-grade, low-temperature micro-soldering alloy paste formulated specifically for smartphone logic board rework, multi-layer sandwich board bonding, and heat-sensitive BGA chip reballing. Engineered under Forward’s Guard Series quality control standards, this paste is designed to reflow smoothly at a reduced temperature profile, effectively protecting delicate processors, NAND flash modules, and neighboring underfilled components from blistering, pad delamination, and thermal stress.
Formulated with uniform micro-spherical powder particles suspended in a high-activity, zero-halogen flux vehicle, the FW-WX1036 provides continuous, consistent aperture filling through micro-pitch stencils. It features controlled thermal fluidity during reflow to prevent solder ball spattering and bridge faults. Once reflowed, it leaves bright, high-conductivity solder joints with high shear strength and an inert, non-corrosive residue that will not cause electrical leakage on high-density mobile logic boards.
Key Capabilities & Workshop Advantages
- Safe Low-Temperature Reflow: Operates at a low thermal threshold, providing a safe window for double-decker logic board separation and re-attachment without disturbing factory-soldered internal chips.
- Guard Series Thermal Defense: Minimizes heat exposure to sensitive surrounding ICs (Baseband, CPU, Power Management ICs) during hot-air gun and heating table operations.
- Micro-Spherical Fine Powder Matrix: Uniform particle distribution ensures clean squeegee application across direct-heat BGA stencils with zero aperture clogging and crisp release.
- Non-Splattering Formulation: Controlled solvent evaporation prevents aggressive boiling, solder beading, and random micro-ball expulsion across microscopic circuit traces.
- High Surface Insulation Resistance (SIR): Non-conductive, halogen-free flux core prevents parasitic micro-current drain, phantom short circuits, and board corrosion.
- No-Clean Inert Residue: Forms a clear, chemically stable post-reflow boundary layer that does not require mandatory chemical washing.
- Stable Pot/Jar Packaging: Packaged in a sealed container designed to resist vehicle dry-out, flux separation, and atmospheric oxidation on the technician's bench.
Technical Specification Matrix
Parameter Profile | Specification Details |
Brand & Series | FORWARD – Guard Series |
Product Model | FW-WX1036 |
Classification | Low-Temperature BGA Solder Paste |
Powder Particle Size | Type 4 / Type 5 (Micro-spherical structure) |
Flux Vehicle | Halogen-Free, No-Clean, High Surface Insulation Resistance |
Packaging Format | Sealed Workshop Container / Jar (Non-Syringe) |
Joint Characteristics | Mirror-bright, high conductivity, crack-resistant |
Residue Characteristics | Clear, non-conductive, non-corrosive |
Primary Compatibility | iPhone & Android middle-frame sandwich boards, FPC sockets, heat-sensitive ICs |
Recommended Bench Workflows
- Double-Decker Sandwich Board Layering: Re-bonding middle frames on iPhone and high-end Android dual-layer motherboards using heating platforms without overheating lower-deck components.
- Delicate Connector & Sockets: Soldering battery connectors, display FPC ports, and camera interface flexes without melting adjacent plastic housings.
- Heat-Sensitive Sensor Rework: Re-soldering dot matrix modules, face recognition sensors, and ambient light chips that lose calibration or take damage under standard high heat.
- Low-Stress BGA Reballing: Reballing small peripheral chips, audio codecs, and secondary power ICs with minimal board warping.
Package Contents:
- 1 × Forward FW-WX1036 Low Temp Solder Paste – Guard Series









