The JCID V1S Pro Programmer with BGA70 / BGA110 / BGA315 Modules is the ultimate all-in-one chip-level diagnostic and micro-soldering workstation designed for professional mobile repair centers. By consolidating the legacy functionality of the PRO1000S, P13, and V1SE into a single device powered by a 6-core 64-bit dual operating system and a 4.0-inch HD touch screen, the V1S Pro handles both heavy NAND storage engineering and peripheral module repair.
This comprehensive combo includes three specialized NAND clamping modules—BGA70, BGA110, and BGA315—giving bench technicians full hardware read, write, deep format, partition repair, and storage capacity upgrade support covering iPhone 6S all the way through iPhone 15 Pro Max. In addition to PCIe flash memory servicing, the V1S Pro serves as the primary master controller for peripheral boards to repair Screen True Tone, Face ID dot projectors, battery health metrics, receiver FPC sensors, and vibration motors.
Triple NAND Socket Coverage & Architecture Matrix
1. BGA70 Socket Module (iPhone 6S to 7 Pro Max & iPad)
- Supported Devices: iPhone 6S, 6S Plus, 7, 7 Plus, SE (1st Gen); iPad 5/6/7, iPad Pro 9.7/10.5/12.9 (1st & 2nd Gen).
- NAND Architecture: PCIe BGA70 Flash Memory.
- Core Capabilities: High-speed SysCFG read/write/backup, capacity upgrade (up to 128GB/256GB), one-click Wi-Fi unbind, and deep block formatting to resolve boot-loops and iTunes Error 4013.
2. BGA110 Socket Module (iPhone 8 to 13 Pro Max & iPad)
- Supported Devices: iPhone 8, 8 Plus, X, XR, XS, XS Max, 11, 11 Pro, 11 Pro Max, SE 2/3, 12, 12 Mini, 12 Pro, 12 Pro Max, 13, 13 Mini, 13 Pro, 13 Pro Max; compatible iPad models.
- NAND Architecture: PCIe NVMe BGA110 Flash Memory.
- Core Capabilities: High-speed NVMe SysCFG read/write, storage upgrades up to 512GB/1TB, factory Wi-Fi unbind without motherboards desoldering, and deep formatting to fix iTunes Error 9, Error 4013, and Error 4014.
3. BGA315 Socket Module (iPhone 14 to 15 Pro Max & iPad)
- Supported Devices: iPhone 14, 14 Plus, 14 Pro, 14 Pro Max, 15, 15 Plus, 15 Pro, 15 Pro Max; compatible iPad Pro models.
- NAND Architecture: Next-Generation High-Speed PCIe NVMe BGA315 Flash Memory.
- Core Capabilities: Advanced NVMe storage read/write, storage expansion up to 1TB/2TB, factory partition repair, and deep formatting on high-density NAND chips.
Multi-Functional Diagnostic Capabilities (Peripheral Boards)
Beyond chip-level NAND programming, the V1S Pro acts as a modular bench hub compatible with V1SE and PRO1000S repair boards:
- Screen True Tone & Touch Recovery: Restore True Tone display data with or without the original screen for iPhone 7 through 15 Pro Max, correcting color temperature and ambient light sensing.
- Face ID Dot Projector Restoration: Read, write, and activate TrueDepth dot projector data to resolve "Move iPhone higher/lower" errors on iPhone X through 15 Pro Max.
- Battery Health & Cycle Calibration: Read and modify battery cycles, clear "Important Battery Message" non-genuine warnings, and calibrate health percentage on iPhone 8 through 15 series using tag-on or built-in repair flex cables.
- Receiver FPC & Ambient Sensor Repair: Restore proximity and ear-speaker flex communication lines without losing original True Tone calibrations.
- Vibration Motor & Camera Repair: Clone Taptic Engine calibration data and repair rear camera / LiDAR radar pop-up warnings.
Technical Specification Matrix
Parameter Profile | Specification Details |
Product Model | JCID V1S Pro Multifunctional Programmer Workstation |
Included Sockets | BGA70 Module + BGA110 Module + BGA315 Module |
Full Device Scope | iPhone 6S through iPhone 15 Pro Max; iPad & iPad Pro series |
Operating System | 6-core 64-bit dual-system platform (Android + Linux) |
Display Interface | 4.0-inch HD Capacitive Touch Screen |
Connectivity | Dual-band Wi-Fi (2.4G/5G), Type-C High-Speed USB, TF Card slot |
PC Software | JCID Repair Assistant (Windows 10 / Windows 11 64-bit) |
Backward Compatibility | Supports JCID V1S / V1SE boards and PRO1000S modules |
Optional Expansions | Supports BGA60 socket, screen testing MV01, bus detection adaptors |
Step-by-Step NAND Upgrade & Repair Workflow
- Connect & Power Up: Power the JCID V1S Pro using the dual Type-C interface or connect directly to your workshop PC via JCID Repair Assistant.
- Mount the Target Module: Snap the required module (BGA70, BGA110, or BGA315) onto the high-speed expansion bay pins.
- Read Original SysCFG: Seat the desoldered original NAND chip into the socket clamp, verify pin alignment, and press Read to save the device's factory serial numbers, Bluetooth/Wi-Fi MAC addresses, and calibration data.
- Prepare Replacement NAND: Insert the clean, higher-capacity NAND IC into the socket module.
- Format & Write SysCFG: Execute a Deep Format to clear old partition tables, choose the matching target model profile, and click Write SysCFG to burn the original identifiers.
- Solder & System Restore: Solder the replacement NAND back onto the logic board and complete a fresh iOS firmware flash via iTunes or 3uTools.
Package Contents:
- 1 × JCID V1S Pro Multifunctional Programmer Host Unit
- 1 × JCID BGA70 NAND Clamping Socket Module
- 1 × JCID BGA110 NAND Clamping Socket Module
- 1 × JCID BGA315 NAND Clamping Socket Module
- 1 × High-Speed USB Type-C Data & Power Cable
