JCID P15 Nand Programmer With BGA110 / BGA315

The JCID P15 NAND Programmer with BGA110 / BGA315 Modules is a complete, dual-socket chip-level iOS repair system designed for professional micro-soldering labs and motherboard repair specialists. By bundling both the BGA110 and BGA315 high-precision clamping sockets with the P15 host, this kit covers storage read, write, deep format, partition repair, and capacity expansion from iPhone 8 up to iPhone 15 Pro Max, as well as compatible iPad models.

Equipped with an integrated HD OLED real-time status screen, the P15 host provides immediate visual feedback on device connection status, operational voltage, current consumption, and read/write states. Technicians can execute standalone diagnostics or interface directly with the JCID Repair Assistant PC software to perform deep low-level block formatting, unbind Wi-Fi modules without flashing, and handle SysCFG modification.

Dual-Socket Device & Architecture Coverage

1. BGA110 Socket Module (iPhone 8 to 13 Pro Max)

• Supported Devices: iPhone 8, 8 Plus, X, XR, XS, XS Max, 11, 11 Pro, 11 Pro Max, SE 2, 12, 12 Mini, 12 Pro, 12 Pro Max, 13, 13 Mini, 13 Pro, 13 Pro Max, and compatible iPad models.
• Processor Families: Apple A11, A12, A13, A14, and A15 Bionic.
• Primary Capabilities: High-speed SysCFG read/write/backup, capacity upgrade (64GB to 128GB/256GB/512GB), one-click Wi-Fi unbind, and deep block formatting to resolve iTunes recovery errors (Error 9, Error 4013, Error 4014).

2. BGA315 Socket Module (iPhone 14 to 15 Pro Max)

• Supported Devices: iPhone 14, 14 Plus, 14 Pro, 14 Pro Max, 15, 15 Plus, 15 Pro, 15 Pro Max, and compatible iPad models.
• Processor Families: Apple A15, A16, and A17 Pro.
• Primary Capabilities: Next-generation PCIe NVMe NAND architecture read/write, factory SysCFG modification, storage upgrades up to 1TB, and deep formatting of damaged sectors on modern high-density flash chips.

Key Capabilities & Engineering Features

• High-Speed Read & Write Bus: Enhanced data transfer protocols reduce NAND read, backup, and write cycles to mere seconds, significantly cutting bench turnaround times.
• Storage Capacity Expansion: Easily upgrade customer devices to higher storage tiers (e.g., 128GB $\to$ 256GB/512GB/1TB) by transferring original calibration, serial number, and factory hardware identifiers onto clean replacement NAND chips.
• One-Click Wi-Fi Unbind: Clear factory peripheral binding flags directly from the NAND partition data without requiring motherboard firmware re-flashing or baseband modifications.
• NAND Deep Format & Error Fixes: Execute low-level factory block formatting on corrupted or bad-block NAND ICs to recover memory chips throwing iTunes restore loops or boot faults.
• Live HD OLED Screen: Displays operational mode, active bus voltage, operating current in milliamps, and prompt indicators directly on the programmer faceplate.
• Non-Removal Purple Screen Diagnostics: Supports direct USB-connected purple screen mode for reading and revising SysCFG parameters on supported platforms without physically desoldering the chip.
• Modular Magnetic Snap-In Dock: Swiftly interchange between BGA110 and BGA315 sockets via the dual-connector guide rail system without loose ribbon cables or fragile clips.

Technical Specification Matrix

Step-by-Step Programming & Capacity Upgrade Guide

1. Setup & PC Interface: Connect the JCID P15 to your workshop PC via the supplied USB Type-C cable and launch JCID Repair Assistant.
2. Mount the Target Socket: Align either the BGA110 (iPhone 8–13PM) or BGA315 (iPhone 14–15PM) module onto the P15 guide pins until seated firmly.
3. Read Original SysCFG: Place the desoldered original NAND chip into the socket, clamp the top cover shut, and click Read / Backup SysCFG to save factory serials, Wi-Fi/BT MAC addresses, and model region data.
4. Prepare Replacement NAND: Remove the original chip and insert the replacement higher-capacity NAND into the socket.
5. Format & Write: Click Format to clear prior block maps, select the target device model, and click Write SysCFG to flash the backed-up profile onto the new flash memory.
6. Solder & Clean Restore: Solder the programmed NAND chip back onto the logic board and restore the device via standard iTunes or 3uTools flashing.

Package Contents:

• 1 × JCID P15 Programmer Host Unit
• 1 × JCID BGA110 NAND Socket Module
• 1 × JCID BGA315 NAND Socket Module
• 1 × High-Speed USB Type-C Cable

Explain:

• BGA60 module: for iPhone 4/SE-6 Plus Nand flash

• BGA70 module: for iPhone 6S-7 Plus Nand flash

• BGA110 module: for iPhone 8-13 Pro Max Nand flash

• BGA315 module: for iPhone 14-15 series Nand flash